How to Place a Checkbox Into a DBGrid

How to Place a Checkbox Into a DBGrid There are numerous ways and reasons to customize the output of a DBGrid in Delphi. One way is to add checkboxes so that the result is more visually attractive. By default, if you have a boolean field in your dataset, the DBGrid displays them as True or False depending on the value of the data field. However, it looks much better if you choose to use a true checkbox control to enable editing the fields. Create a Sample Application Start a new form in Delphi, and place a TDBGrid, TADOTable, and TADOConnection, TDataSource. Leave all the component names as they are when they were first dropped into the form (DBGrid1, ADOQuery1, AdoTable1, etc.). Use the Object Inspector to set a ConnectionString property of the ADOConnection1 component (TADOConnection) to point to the sample QuickiesContest.mdb MS Access database. Connect DBGrid1 to DataSource1, DataSource1 to ADOTable1, and finally ADOTable1 to ADOConnection1. The ADOTable1 TableName property should point to the Articles table (to make the DBGrid display the records of the Articles table). If you have set all the properties correctly, when you run the application (given that the Active property of the ADOTable1 component is True) you should see, by default, the DBGrid display the boolean fields value as True or False depending on the value of the data field. CheckBox in a DBGrid To show a checkbox inside a cell of a DBGrid, well need to make one available for us at run time. Select the Data controls page on the Component Palette and pick a TDBCheckbox. Drop one anywhere on the form - it doesnt matter where, since most of the time it will be invisible or floating over the grid. Tip: TDBCheckBox is a data-aware control that allows the user to select or deselect a single value, which is appropriate for boolean fields. Next, set its Visible property to False. Change the Color property of DBCheckBox1 to the same color as the DBGrid (so it blends in with the DBGrid) and remove the Caption. Most importantly, make sure the DBCheckBox1 is connected to the DataSource1 and to the correct field. Note that all the above DBCheckBox1s property values can be set in the forms OnCreate event like this: procedure TForm1.FormCreate(Sender: TObject);begin DBCheckBox1.DataSource : DataSource1; DBCheckBox1.DataField : Winner; DBCheckBox1.Visible : False; DBCheckBox1.Color : DBGrid1.Color; DBCheckBox1.Caption : ; //explained later in the article DBCheckBox1.ValueChecked : Yes a Winner!; DBCheckBox1.ValueUnChecked : Not this time.; end; What comes next is the most interesting part. While editing the boolean field in the DBGrid, we need to make sure the DBCheckBox1 is placed above (floating) the cell in the DBGrid displaying the boolean field. For the rest of the (non-focused) cells carrying the boolean fields (in the Winner column), we need to provide some graphical representation of the boolean value (True/False). This means you need at least two images for drawing: one for the checked state (True value) and one for the unchecked state (False value). The easiest way to accomplish this is to use the Windows API DrawFrameControl function to draw directly on the DBGrids canvas. Heres the code in the DBGrids OnDrawColumnCell event handler that occurs when the grid needs to paint a cell. procedure TForm1.DBGrid1DrawColumnCell( Sender: TObject; const Rect: TRect; DataCol: Integer; Column: TColumn; State: TGridDrawState); const IsChecked : array[Boolean] of Integer (DFCS_BUTTONCHECK, DFCS_BUTTONCHECK or DFCS_CHECKED);var DrawState: Integer; DrawRect: TRect;beginif (gdFocused in State) thenbeginif (Column.Field.FieldName DBCheckBox1.DataField) thenbegin DBCheckBox1.Left : Rect.Left DBGrid1.Left 2; DBCheckBox1.Top : Rect.Top DBGrid1.top 2; DBCheckBox1.Width : Rect.Right - Rect.Left; DBCheckBox1.Height : Rect.Bottom - Rect.Top; DBCheckBox1.Visible : True; endendelsebeginif (Column.Field.FieldName DBCheckBox1.DataField) thenbegin DrawRect:Rect; InflateRect(DrawRect,-1,-1); DrawState : ISChecked[Column.Field.AsBoolean]; DBGrid1.Canvas.FillRect(Rect); DrawFrameControl(DBGrid1.Canvas.Handle, DrawRect, DFC_BUTTON, DrawState); end; end; end; To finish this step, we need to make sure DBCheckBox1 is invisible when we leave the cell: procedure TForm1.DBGrid1ColExit(Sender: TObject);beginif DBGrid1.SelectedField.FieldName DBCheckBox1.DataField then DBCheckBox1.Visible : Falseend; We need just two more events to handle. Note that when in editing mode, all keystrokes are going to the DBGrids cell, we have to make sure they are sent to the CheckBox. In the case of a CheckBox we are primarily interested in the [Tab] and the [Space] key. [Tab] should move the input focus to the next cell, and [Space] should toggle the state of the CheckBox. procedure TForm1.DBGrid1KeyPress(Sender: TObject; var Key: Char);beginif (key Chr(9)) then Exit; if (DBGrid1.SelectedField.FieldName DBCheckBox1.DataField) thenbegin DBCheckBox1.SetFocus; SendMessage(DBCheckBox1.Handle, WM_Char, word(Key), 0); end;end; It could be appropriate for the Caption of the checkbox to change as the user checks or unchecks the box. Note that the DBCheckBox has two properties (ValueChecked and ValueUnChecked) used to specify the field value represented by the checkbox when it is checked or unchecked. This ValueChecked property holds Yes, a Winner!, and ValueUnChecked equals Not this time. procedure TForm1.DBCheckBox1Click(Sender: TObject);beginif DBCheckBox1.Checked then DBCheckBox1.Caption : DBCheckBox1.ValueChecked else DBCheckBox1.Caption : DBCheckBox1.ValueUnChecked;end; Run the project and youll see the checkboxes all over the Winner fields column.

The Impact Of Global Warming On Developing Countries Essay

The Impact Of Global Warming On Developing Countries - Essay Example Global warming has been directly linked to increased emissions of carbon dioxide and other gases. The Earth is warmed by the radiant heat from the rays of the sun, which is generally equal to the amount of energy that is radiated back from the Earth in the form of infra red radiation. Thus the temperature of the Earth remains constant. However, the temperature of the Earth is directly dependent upon the composition of its atmosphere and when there is an excess of carbon dioxide and similar gases in the atmosphere, it blocks the infra red radiation from the surface of the Earth, trapping heat in the lower atmosphere and creating a "greenhouse effect" which increases global temperatures Rapid industrialization has resulted in increased energy use, with the resultant multiplication of carbon dioxide emissions. According to Roberts (2004), energy demand in countries like India, China and Brazil is developing so fast that it may double by 2020, while in the developed countries, the demand for power is fast outstripping supply, raising the specter of blackouts. In fact Roberts (2004) also points out that â€Å"China has seen dramatic increases in its energy consumption in recent years (pp. 143–145). In the words of one scientist; â€Å"China's rapid industrialization has led to upward revision of predictions... While previously we thought in terms of doubling the strength of the CO2 content of the pre industrial atmosphere, current thought is moving toward a tripling† (Broecker 1586).

The Conduct of Health Insurance Policy Fraud in the Rainmaker Assignment

The Conduct of Health Insurance Policy Fraud in the Rainmaker - Assignment Example Great Benefit insurance company has wilfully committed fraud when it continued to accept premiums and new policyholders when it knows for a fact that it is in a precarious financial condition to settle obligations due to its huge debt. I would like to give Great Benefit insurance company the benefit of the doubt that when it incorporated the company, it did not intend to wrong its policyholders but meant to fulfill its obligation. In the novel or movie, the insurance company may have been caused to commit fraud to preserve itself as a business entity because it is already hemorrhaging financially due to heavy debts. They may have employed the initial policy of denying all claims regardless of its legitimacy as a coping mechanism of their dire financial status. So the first measure that I will institute is for the insurance company to avoid the circumstance that will cause them to commit fraud in the future. I will fix their financial position by devising a policy that will make the company liquid at all times to settle all the claims of its policyholders in the future. Just like in the banks, I will require the insurance to have a liquidity that is commensurate to a certain number of policyholders that should a significant number of them will file a legitimate claim against their policies, the insurance company will be in a financial position to fulfill its obligation. Equally important is the institution of a policy of limiting the acceptance of new policyholders in accordance with its financial capacity and liquidity. For the time being, I will recommend that Great Benefits insurance company not to accept new policyholder until it has restructured its financial position.

Synthesis and Properties of Liquid Crystals for VAN

Synthesis and Properties of Liquid Crystals for VAN Synthesis and properties of liquid crystals for vertically aligned nematic (VAN) displays Introduction Liquid crystals where first observed in 1853 and 1855 by Rudolph Virchow and C. Mettenheimer respectively, both observed a flowing fluid like compound which was birefringent (brightly coloured) between cross-polarisers much like a crystalline solid, hence the compound was both liquid and crystal thus liquid crystal. [3, 4]. It was not until the late 1980’s that Liquid crystals and their truly fascinating fundamental properties began their tremendous success in commercial applications.1–5 Subsequently giving rise to the vertically aligned nematic (VAN) mode in the early 1990’s. The liquid crystalline phase can be best described as a hybrid of the two most common phases of matter, Liquids and Crystals. LC compounds diffuse about much like the molecules of a liquid giving them a fluid nature, combined with this they manage to maintain a small magnitude of orientational order and sometimes some positional order in a similar manner as a crystalline solid would. Hence, liquid crystals are anisotropic fluids. Properties of Liquid crystals and the nematic mesophase The nematic phase of calamitic (rod like) liquid crystals is the simplest liquid crystal phase. In this phase the molecules maintain a preferred orientatioanl direction as they diffuse throughout the sample. There is no positional order in the phase as depicted by figure 1.1. Synthesis of Liquid Crystals General Synthesis Generally, the most common liquid crystals are based on aromatic sub units due to their ease of synthesis and obtainability. The vast majority of LC building blocks are commercially accessible or fairly simple to synthesize via electrophilic substitutions such as Friedel-Crafts acylation, bromonation and nitration. For those functional groups that cannot be directly substituted interconverions usually take place with bromine often being the chosen leaving group (e.g., CO2H, NH2, CN and OH). Due to the individual nature of substituents their specific directing effect and a specific effect on the rate of reaction must be taken into consideration. By taking this into account reactions must be carried out in the appropriate order to arrive at the desired product. Figure 1 Electrohpilic Substiutions of Benzene A key advancement in synthesis arrived with the recognition that a wide range of intermediates could be efficiently prepared from alkyl-bromo-benzenes due to the ease of conversion of the bromo substituent into a previously inaccessible groups. From a range of synthetic methods described in scheme 1 a valuable number of carboxcylic acids and phenols can be prepared. This follows on to the synthesis of multi-aryl LC materials where esterification (see Scheme 2) is employed to couple multiple aryl units. Esterification commonly occurs in two processes firstly, the traditional method (Method A) of converting the carboxcylic acid into the acid chloride derivative with either thionyl chloride or oxalyl chloride. The acid chloride is then reacted with the phenol in the presence of a base to remove the hydrogen chloride as it is formed. The second and more recent method (Method B) involves an in-situ reaction which uses N,N-dicyclohexylcarbodiimide (DCC) to activate the acid towards nucleop hilic attack from the phenol and a proton transfer catalyst ( 4-(N,N-dimethylamino)pyridine ) (DMAP). Scheme 2 Esterification coupling reaction LC materials with multiaryl cores (e.g., biphenyls and terphenyls) are somewhat more difficult to produce due to the direct bond between aryl sections. However, the development of palladium-catalysed cross-coupling reactions has created a means in which to form the direct carbon-carbon bonds needed. There are a vast number of methods to facilitate the generation of these carbon-carbon bonds but by far the most prolific involves the use of aryl bromides (4) and arylboronic acids (5). Figure 3 Palladium catalysed cross-coupling Alternative to the use aryl bromides are the aryl iodides, there increased stability as a leaving group provide a reaction pathway with an increased rate of reaction. Chloro and triflate are also other viable leaving groups, where the triflate group is essential in the synthesis of alkenyl-substituted LCs. Perhaps the most important palladium-catalysed cross-coupling reaction is the selective coupling that can occur by using a bromo-fluoro-iodo-substituted system (see Scheme 4) Figure 4 Dicouplong reactions of Benzene derivatives As the iodo group is a better leaving group it can be coupled with an arylboronic acid, following purification a second coupling reaction can occur on the bromo site giving rise to the synthesis of LC materials with more than two aromatic core units. In order to control the mesomorphic and physical properties of LC lateral substitutions are often employed, the fluoro substituent is the most commonly used lateral unit, as it is electron withdrawing in nature it renders adjacent H atoms acidic and thus making them vulnerable to strong basic conditions. By taking advantage of this vulnerability the desired functional groups for example the boronic acids needed for cross-coupling reactions are far more easily obtained. The only consistent approach for introducing a fluoro substituent into an aromatic system is via the diazotisation and successive fluoronation of the chosen aromatic amine, which in turn generated from the reduction of the nitroarene generated from the nitration of the bas ic aryl unit. Nonetheless, a broad variety of simple fluoro-substituted materials can be easily acquired commercially and thus synthesis often begins with fluro substituents already present (see Scheme 5). Unfortunately this gives rise to complications when trying to introduce terminal alkyl chains to the fluorinated compounds. Accordingly, a different approach is required and thus bromo-fluoro-iodo-benzene units are needed for successful synthesis of fluoro-substituted LC materials. Scheme 4 shows some reactions of these units to synthesis some adavance LC materials. The finishing touches Liquid crystals for VAN mode displays must have one vital property in order to be considered for this application, negative dielectric anisotropy. Negative dielectric anisotropy can be introduced by creating a strong lateral dipole within the LC material this is done by introducing lateral groups with high electronegativity such as fluorine as explained previously in this section, lateral chloro substitutents have also been considered in order to create negative dielectric anisotropy as they create a greater dipole than fluorine. However, the greater size of the chloro substituent renders it of little use as this subsequently gives the material low liquid crystal phase stability and high viscosity making it useless in VAN mode displays. Figure 5 Subsitution reactions of difluroaryl compounds Vertically aligned nematic (VAN) liquid crystal displays About the VAN displays The vertically aligned nematic (VAN) mode first came into development in the early 1990’s, first generation LC materials were based on rod like molecular structures and managed to achieve fast switching times of around 25ms. Unfortunately, the early attempts to introduce displays of this kind failed. This was for two major reasons, a switching time of What makes up a VAN display? VAN devices are made up of two parallel glass plates separated by a small gap of 3-10Â µm containing the nematic liquid crystal phase, on the top piece of glass sit a thin film of material which polarises a light that passes through it. On the inside of the top piece of glass there is a indium oxide (ITO) layer which acts as a conductor, this layer is linked to a surfactant. The inner layer of the bottom piece of glass is also coated with the ITO layer and the surfactant. The surfactant enables the liquid crystal to be connected with the conductor thus enabling the flow of a current. The display can be designed to be either passive or active. When passive the display does not generate any light itself it instead uses ambient light from surroundings which is reflected by a mirror like surface below the bottom piece of glass. When designed to be active the display is built with a light source behind the display which passes directly through the display rather than being reflected Working principle of VAN displays The average molecular orientation (director orientation) without the electric field is perpendicular to the substrate of the display. With this homeotropic orientation and crossed polarizers, the VA mode is working in the so called normally black mode. For the incident light the liquid crystal in the off state behaves like an isotropic medium (the light sees only the ordinary refractive index). As a consequence very good black states can be achieved independent of the wavelength of the light and the operating temperature. Pixel and electrode design of VA displays allow for a high aperture ratio resulting in a high brightness of the display. These two points are the main reason for the good contrast of VA LCDs.. Since the directors are oriented homeotropically in the off state, they can be tilted randomly in any direction by the electric field. This leads to disclination lines between domains of equal orientation, thus deteriorating the optical performance. Figure 6 VA Mode working display As VAN displays use LC materials with negative dielectric anisotropy, application of a voltage to the ITO films cause the director to tilt away from the normal to the glass surfaces as show in figure 2. This introduces a birefringence because the index of refraction for light polarised parallel to the director is different from the index of refraction for light polarised perpendicular to the director. Some of the resultant elliptically polarised light (all of it if the retardation is 180) passes through the crossed polariser and the display appears bright. In fact, since the retardation depends on the magnitude of the voltage applied to the display, this type of display can be used to produce a range of intensities of light. This is called a grey scale. For VA you have perfect black in the off-state and if apply a voltage the VA materials moves into the parallel position and this is bright. Therefore, you get a better contrast ration in VA displays. The second advantage is the switch ing process. It’s intrinsically faster to move the molecules this way.

AT&T Case study Essay

1. Review AT&T’s past financial policies and financing choices. Were these appropriate for the nature of the business? AT&T Corp., one of the largest companies in the United States, has had a long and storied history. Initially, AT&T operated as a monopoly, but in 1982, Justice Department, broke up the company into individual companies. Prior to divesture (in 1981), AT&T was the largest private company in the world and despite many challenges, AT&T remained an archetypical â€Å"widow-and-orphans† stock for a long time. The term â€Å"widows and orphans† was used to describe stocks with a relatively high degree of safety and dividend income and numbers from exhibit 1speak for themselves. By 1982 the company increased all its key financial indicators. Revenues and operating earnings increased 12% and 6% respectively comparing to year 1981. In ten years, the company raised its revenues, net income, cash and assets more than 2 times. It`s worth to mention that AT&T was able to reduce its total outstanding debt by $ 725 mil and at year-end, the company`s debt ratio stood 42.3% down from 46.7% in 1980. In addition, AT&T neither cancelled nor lowered dividends, and only increased dividend per share by 10% annually. Aforementioned facts suggest that company`s financial policies and financing choices were appropriate for the nature of the business and that AT&T was one stable, reliable and profitable companies in the world by 1982. 2. In what fundamental ways will AT&T’s business change in the near future? Throughout most of the 20th century, AT&T held a monopoly on phone service in the United States. In 1982, through an agreement between AT&T and the U.S. Department of Justice, AT&T agreed to divest itself of its local telephone operations but retain some of its businesses. The principal provision of the antitrust settlement was that the corporation would be split into seven completely independent regional corporations. Each regional company would continue to provide local telephone and other telecommunication services in addition to ability to sell telephone equipment. The remaining or new AT&T would focus on long distance, R&D and manufacturing arms. 3. In view of AT&T’s changing strategic and economic environment, what debt policy would you recommend? What other financial policies are appropriate for the â€Å"new† AT&T? What are likely to be the consequences of these financial policies? The new â€Å"AT&T† was no more monopoly and the company`s management group faced new challenges. First of all, I think that when AT&T was monopoly, managers were averse to risk and led more financially conservative policy. After divestiture, it was clear that the external environment changed and effective actions needed to be taken to beat off intense competition. Moreover, there were several serious questions about future profitability of the new AT&T divisions (especially Western Electric) and it was not clear whether they would be able finance their operations in competitive markets. Taking into consideration above stated facts, at that phase I would recommend to shift gears from debt financing and switch toward equity financing. In addition to the change in financial policy, I would also recommend considering a new acquisition strategy to reach more diversified portfolio and to broaden the company’s scope in other areas.

The Impacts of the Residential School System on the...

‘I want to get rid of the Indian problem. That is my whole point. Our objective is to continue until there is not a single Indian in Canada that has not been absorbed into the body politic and there is no Indian question’ (Scott in Grant, 1996: 273). Canada is a vast territory widely recognised for the cultural and geographical diversity in nature. This alone poses a distinct challenge to understanding a unified conception of Aboriginal Geographies of Canada - particularly for understanding the Geographies of The Canadian Residential Schools System (RSS). The Canadian Residential School System was an early government led approach to Indigenous ‘development’. It was initially implemented to educate the ‘uncivilised’ Aboriginal populations of Canada as a way to assimilate Indigenous people into the colonial settler population. This created profound effects on Indigenous people in Canada, including the spaces and places so integral to their culture. In this essay I will discuss the impacts of the residential school system on the Aboriginal people of Canada with particular reference to how space and place are critical importance to mapping the geographies of the Canadian Residential School System. In conclus ion, I suggest that the impacts of the Canadian Residential school system have had direct impacts on not only physical space, but also the places that have intrinsic meaning to both the identity and culture of Aboriginal people in Canada. Fig 1. SelectedShow MoreRelatedTruth, Reconciliation, Healing : A Curriculum1478 Words   |  6 Pagespaper brings together the two perspectives of residential school abuse and the viewpoint of healing. Intergenerational effects have been created due to residential school and have devastating impacts on Aboriginal communities. This paper explores how a school curriculum would help spread awareness of the wrongs committed against Aboriginal communities and how we can set the path for healing. From the 1880s to 1996, residential schools were operated in Canada by the church and the Canadian governmentRead MoreCanada Is A Nation Free Of Racism Essay1350 Words   |  6 Pagesassumption of many that Canada is a nation free of racism. Canadians pride themselves on being culturally diverse and accepting, and on having relatively progressive social policies such as that of universal healthcare. However, there are many ways in which the current and historical policies have expressed explicit racism that have left an already marginalized population with the crumbs of society. A prime example of this can be demonstrated in the mass overrepresentation of Aboriginal youth in care. ByRead MoreAboriginal Children Into Euro Canadian Culture1418 Words   |  6 Pages Rees 1 â€Å"Thousands of Canada’s Aboriginal children died in Residential Schools that failed to keep them safe from fires, protected from abusers, and healthy from deadly disease† (Kennedy). â€Å"Residential Schools were government-sponsored religious schools established to assimilate Aboriginal Children into Euro-Canadian culture† (Miller). There were approximately 130 schools in every province and territory with the exception of Newfoundland, Prince Edward Island and New Brunswick all with an estimatedRead MoreEffects of Coloniztionon First Nations1483 Words   |  6 Pagesit continues to affect First Nations, Metis, and or Inuit peoples today and how it may be reflected in your proposed specific area of social work practice. To begin with, colonization began when first contact was made between Indigenous peoples of Canada and Europeans. At first the settlers were humble to Indigenous peoples and learnt how to survive the diverse land of what is known as Canada. As settlers began getting established in Canada, the land began getting taken over by Europeans. The signingRead MoreThe Social Determinants Of Health1555 Words   |  7 PagesAmerica to the lives of Indigenous people, has had a tremendous impact comprehensively. After so, this contact decimated every aspect of the Indigenous way of life. The health and well-being of Indigenous people initiated to worsen severely not only in the physical aspect but also mental. According to National Household Survey conducted in 2011, 1,400,685 people have been identified as being a member of one of the Aboriginal groups within Canada. Within these Aboriginal groups, critical mental healthRead MoreThe Truth And Reconciliation Commission ( Trc )1536 Words   |  7 Pageswere forcibly removed from their communities, and sent to Indian residential schools. Generation after generation of indigenous children were denied the right to speak their own language, explore spirituality and to learn about their rich cultural history. These schools were designed to assimilate indigenous children into the society of the European settlers. It was under that system that Aboriginal children were required to attend schools that would ‘take the Indian out of the child,’ in hopes to solveRead MoreResidential schools1468 Words   |  6 Pages Abstract This research explores how the residential schools established in the 19th century affected the Native population and the Canadian government. This has been done by examining primary sources such as digital archives, books, statistics and reports. Upon examination of these events, it becomes clear that residential schools had a long term negative impact on the Aboriginal communities and created a negative image to the Canadian government. Despite the government’s goals of assimilatingRead MoreHow did the residential school affect Canada’s First Nations people?1535 Words   |  7 Pagesthe residential school affect Canada’s First Nations people? In Canadian history, there are a lot of interesting events happened in the past. Some of them are events that are proudly presented such as Battle of Vimy Ridge, Canadian peace keeper and others. On the other hand, there are also a lot of tragedy events that happened in the past. Indian Act is one of an important act which occurred in 1876 and it led to establishment of  Indian residential school, and the Indian residential school is aRead MoreHistory Of Violence Against Aboriginal Women1068 Words   |  5 PagesHistory of violence against Aboriginal women in Canada No analysis of violence against Indigenous women can be made without first looking at colonization as the antipasto of the conflict (Cooper Salomons 2010). â€Å"It is thus paramount to understand the context of colonisation in Canada in order to begin to understand the structural problems and barriers that lead to serious numbers of missing and murder Indigenous women in Canada.† (Cooper Salomons 2010, 31). When the Europeans first came to â€Å"turtleRead MoreCollective Rights995 Words   |  4 Pages* Collective rights are rights Canadians hold because they belong to one of several groups in society. They are rights held by groups (peoples) in Canadian society that are recognized and protected by Canada’s constitution. Those groups include Aboriginals, Francophone and Anglophones. Treaty 6, 7, 8 states that the aboriginals could have health care, education, hunting and fishing rights, reserves, farming assistance, payments annuities, and special benefits. All in return for the first nations

My Years at Troy High School Essay - 1128 Words

Four years of my life drained away at this place called Troy High School. After this year I will be walking away from Troy, worn and torn from the hours of anticipation for grades to be posted, the next weekend to arrive, the answer to whether that special someone will say yes to the next dance, or the unbearable wait for that painstaking bell to ring. Troy is a place of education, a very good one at that, with its Blue Ribbon Award and national recognition, you’d think I would be walking away with knowledge that will serve me well for decades to come, but no. I could have learned the same things I learned at Troy anywhere, it is the insight I picked up that will take me far. â€Å"What insight?† you ask. Its priceless wisdom really, it’s a†¦show more content†¦Shall we go through the categories of classes? Alright, English class, with the countless papers written and the innumerable words read, one forgets the primary protocol that is taught over and ov er again: Don’t take everything literally; things often take on several meanings. This can hold true for the words I wrote in this paper, and to which you are reading now. Also, one can graciously note that every climax has a downfall, without a downfall there is no climax. Math contains its teachings in the same way, during the crude formulas and nauseating equations one forgets the basic idea the teachers unknowingly show us: check your answers and simplify the final product. Okay maybe the idea of checking your answers is not one that is too difficult to comprehend but do consider in real life there is no BOB (Back Of the Book) or a calculator to rely on, all your choices and resolutions are chance, so be sure to check if you first choice is best. Simplification is an awesome ideology; too, being that we live in such a complicated time simplifying may be our only way to survive. In the sciences we take, whether it be Physics, Biology, or Oceanography, the principle fact th at our truths today maybe tomorrows fallacies is expressed. I mean people used to swear the world was flat, now we know the world is round. Perhaps forty-some hundred years from now people will look back and snicker at the fact that we swore weShow MoreRelatedThe Theme Of The Theme In Fences, By August Wilson1683 Words   |  7 Pagessomething the third time I read it to incorporate into my paper. Once I knew what theme I was going to use I started to write my paper. While writing the draft of my paper, I had to walk away from it to stay alert. I paced myself and had timed breaks so I could be as alert as I could. As I wrote my paper, I realized that I needed to not only change my original thesis, but also the title of my paper. I think this was my first time going back and changing my thesis and the title. I was surprised to learnRead MoreA Professor s Ethical Responsibility924 Words   |  4 PagesA Professor’s Ethical Responsibility A professor to a first-year college student has an interesting role to play. In high school, the teacher is typically highly involved in the student’s life. They know what a student is involved in, what type of person they are and who they associate with. Also, in high school, the student is still under their parents’ roof, abiding by their rules and doing what their family finds morally acceptable. However, once a student transitions into college, these linesRead MoreWe Are Looking For A Home Essay1118 Words   |  5 PagesSo you are looking for a home in Newnan? Congratulations! You are in for a treat. Newnan, GA is a wonderful place to live and raise a family. An hour south on I-85, it is not too crowded or too deserted. The people are friendly and the schools are of high quality. There are four good places for looking for real estate in Newnan, and all of them are easy to use and navigate. Access Coweta is a local online bulletin board that has free listings for those who are selling their homes or renting theirRead MoreDeath Of A Salesman And Fences Essay1264 Words   |  6 Pagesbetween a father, and a son is an essential one. This relationship can determine how a boy will grow up into a man, what good habits will he pick up from his father or what bad ones. Although the fathers in Death of a Salesman and Fences; Willy and Troy wanted whats best for their sons, they did more harm than good. A terrible father and son relationship can cause a strain on the sons mind by constantly needing praise from their dad. Thus, Biff and Corys relationship with their fathers were soRead MoreFences by August Wilson791 Words   |  3 Pagesthe most. In the play Fences by August Wilson, two main characters Troy and Cory Maxon build a fence, literally and metaphorically, which as the book progresses, becomes a symbol that allows each character to truly understand each other. In Fences, Troy Maxon builds a fence around his property that contains metaphorical reasons as well as the literal meaning. During a conversation with Troy and Cory, Bono mentions the fence Troy is building for his wife Rose and says â€Å"Some people build fences toRead MoreCan People Really Change?903 Words   |  4 Pagestwenty has wasted thirty years of his life. All people change when they go through different phases in their lives but not everyone learns from their mistakes. The play Fence, by August Wilson, is a story of a man, Troy, who faces many problems in his life but unfortunately never learns from his experiences. Troy slowly loses everyone in his life and then eventually dies from a heart attack. The story takes places in the 1957, when black people were still being mistreated. Troy is a big, stubborn blackRead MoreEssay about Act one Scene 3 of Fences 1550 Words   |  7 Pageselse I’ve read this semester. This scene strikes close to my heart, because it is about life lessons taught through work. If there is anything I learned from my childhood it was hard work is the best teacher and when you have a father like mine there is plenty of work to do. This scene also displays a great situation where a young man must be taught about priorities, another lesson that was taught to me through work that I accomplished with my father. The portion of Fences that I will be discussingRead More Music in Education1081 Words   |  5 Pages Why Music Is Important To Having A Complete Education nbsp;nbsp;nbsp;nbsp;nbsp;With school budget cuts, and no music instruments, more and more people are beginning to realize the benefits of having music in education. Providing music as part of education helps develop intelligence that leads to greater success in school and in life. Everyone from VH1 Save The Music to The National Association For Music Education agree that, â€Å"Every student in the nation should have an education in the artsRead MoreFather and Son in Death of a Salesman, and Fences Essay966 Words   |  4 Pagesinstance in the narratives, â€Å"Death of a Salesman,† and â€Å"Fences† both Willy and Troy are fathers who have a difficult time in earning respect from their sons, and being a role model for them. Between, â€Å"Death of a Salesman,† and â€Å"Fences,† both protagonists, Willy and Troy both depict the role of a father in distinctive ways; however, in their struggle, Willy is the more sympathetic of the two. In comparing Willy and Troy, as fathers, one could feel more sympathy in Willy for his everlasting struggleRead MoreComparing Death Of A Salesman And Fences By August Wilson947 Words   |  4 Pagessimilarities there are two, hard working men who are trying to live the American dream but instead end up becoming frustrated by life. The main character of each book, Willy Loman and Troy Maxson are similar in many ways. They both try hard to be good men and fathers, but unfortunately, they both fail in certain aspects. Troy isolates himself from his youngest son, and many could say that he is too harsh and unnaturally cold towards him. Willy in a way believes that his grown sons could not have done any